Edit Measurements
The Measurement Editor (Edit>Edit Measurements...) allows you to copy or 'clone' previously recorded measurements, or manually create new measurements.
To generate a new measurement simply enter a timestamp date and time, the units to be used on the X and Y scales, the X scale's start and end values, the values for each sample required, and any other
values you wish to use for the new measurement.
To create a new measurement based on a previous recording:
- Click the existing recording in the navigator list,
- Press the Load from Measurement button. The recording's values will be displayed in the Measurement Editor.
- Alter the measurement values as required.
- Press the Create at this location button. A new measurement will be created and displayed in the navigator list.
Note: The Measurement Editor can not be used to alter the recorded
values of an existing recording. The sampling rate of new
measurements is calculated automatically based upon the number of
samples entered into the samples field.
Last Reviewed: 08/Jun/2009 Source: Ascent Software Guide Revision 15 April 2009 - pages 49 & 50